GENERAL SYNTAX¶

Whitespace is ignored. Three forms of comments are supported:

In addition, script arguments given at the end of the command line may be inserted. Use $1 ... $<NN> for insertion unquoted, @1 ... @<NN> for insertion as a string literal. The number of arguments may be accessed through $# (as an unquoted number) or through @# (as a quoted number). These may be used at any place a token may begin, including within the preprocessing stage. Reference to an argument number beyond what was actually given is an error.

PREPROCESSING¶

A simple conditional preprocessing stage is run as a part of parsing. The general form is similar to the cond ? exp1 : exp2 ternary operator:

%( CONDITION %? TRUE-TOKENS %)
%( CONDITION %? TRUE-TOKENS %: FALSE-TOKENS %)

The CONDITION is either an expression whose format is determined by its first keyword, or a string literals comparison or a numeric literals comparison. It can be also composed of many alternatives and conjunctions of CONDITIONs (meant as in previous sentence) using || and && respectively. However, parentheses are not supported yet, so remembering that conjunction takes precedence over alternative is important.

If the first part is the identifier kernel_vr or kernel_v to refer to the kernel version number, with ("2.6.13-1.322FC3smp") or without ("2.6.13") the release code suffix, then the second part is one of the six standard numeric comparison operators <, <=, ==, !=, >, and >=, and the third part is a string literal that contains an RPM-style version-release value. The condition is deemed satisfied if the version of the target kernel (as optionally overridden by the -r option) compares to the given version string. The comparison is performed by the glibc function strverscmp. As a special case, if the operator is for simple equality (==), or inequality (!=), and the third part contains any wildcard characters (* or ? or [), then the expression is treated as a wildcard (mis)match as evaluated by fnmatch.

If, on the other hand, the first part is the identifier arch to refer to the processor architecture (as named by the kernel build system ARCH/SUBARCH), then the second part is one of the two string comparison operators == or !=, and the third part is a string literal for matching it. This comparison is a wildcard (mis)match.

Similarly, if the first part is an identifier like CONFIG_something to refer to a kernel configuration option, then the second part is == or !=, and the third part is a string literal for matching the value (commonly "y" or "m"). Nonexistent or unset kernel configuration options are represented by the empty string. This comparison is also a wildcard (mis)match.

If the first part is the identifier systemtap_v, the test refers to the systemtap compatibility version, which may be overridden for old scripts with the --compatible flag. The comparison operator is as is for kernel_v and the right operand is a version string. See also the DEPRECATION section below.

If the first part is the identifier systemtap_privilege, the test refers to the privilege level that the systemtap script is compiled with. Here the second part is == or !=, and the third part is a string literal, either "stapusr" or "stapsys" or "stapdev".

If the first part is the identifier guru_mode, the test refers to if the systemtap script is compiled with guru_mode. Here the second part is == or !=, and the third part is a number, either 1 or 0.

If the first part is the identifier runtime, the test refers to the systemtap runtime mode. See ALTERNATE RUNTIMES below for more information on runtimes. The second part is one of the two string comparison operators == or !=, and the third part is a string literal for matching it. This comparison is a wildcard (mis)match.

Otherwise, the CONDITION is expected to be a comparison between two string literals or two numeric literals. In this case, the arguments are the only variables usable.

The TRUE-TOKENS and FALSE-TOKENS are zero or more general parser tokens (possibly including nested preprocessor conditionals), and are passed into the input stream if the condition is true or false. For example, the following code induces a parse error unless the target kernel version is newer than 2.6.5:

%( kernel_v <= "2.6.5" %? **ERROR** %) # invalid token sequence

The following code might adapt to hypothetical kernel version drift:

probe kernel.function (


  %( kernel_v <= "2.6.12" %? "__mm_do_fault" %:


     %( kernel_vr == "2.6.13*smp" %? "do_page_fault" %:


        UNSUPPORTED %) %)
) { /* ... */ }
%( arch == "ia64" %?


   probe syscall.vliw = kernel.function("vliw_widget") {}
%)

PREPROCESSOR MACROS¶

The preprocessor also supports a simple macro facility, run as a separate pass before conditional preprocessing.

Macros are defined using the following construct:

@define NAME %( BODY %)
@define NAME(PARAM_1, PARAM_2, ...) %( BODY %)

Macros, and parameters inside a macro body, are both invoked by prefixing the macro name with an @ symbol:

@define foo %( x %)
@define add(a,b) %( ((@a)+(@b)) %)


   @foo = @add(2,2)

Macro expansion is currently performed in a separate pass before conditional compilation. Therefore, both TRUE- and FALSE-tokens in conditional expressions will be macroexpanded regardless of how the condition is evaluated. This can sometimes lead to errors:

// The following results in a conflict:
%( CONFIG_UTRACE == "y" %?


    @define foo %( process.syscall %)
%:


    @define foo %( **ERROR** %)
%)
// The following works properly as expected:
@define foo %(


  %( CONFIG_UTRACE == "y" %? process.syscall %: **ERROR** %)
%)

The first example is incorrect because both @defines are evaluated in a pass prior to the conditional being evaluated.

Normally, a macro definition is local to the file it occurs in. Thus, defining a macro in a tapset does not make it available to the user of the tapset. Publically available library macros can be defined by including .stpm files on the tapset search path. These files may only contain @define constructs, which become visible across all tapsets and user scripts.

VARIABLES¶

Identifiers for variables and functions are an alphanumeric sequence, and may include _ and $ characters. They may not start with a plain digit, as in C. Each variable is by default local to the probe or function statement block within which it is mentioned, and therefore its scope and lifetime is limited to a particular probe or function invocation.

Scalar variables are implicitly typed as either string or integer. Associative arrays also have a string or integer value, and a tuple of strings and/or integers serving as a key. Here are a few basic expressions.

var1 = 5
var2 = "bar"
array1 [pid()] = "name"     # single numeric key
array2 ["foo",4,i++] += 5   # vector of string/num/num keys
if (["hello",5,4] in array2) println ("yes")  # membership test

The translator performs type inference on all identifiers, including array indexes and function parameters. Inconsistent type-related use of identifiers signals an error.

Variables may be declared global, so that they are shared amongst all probes and live as long as the entire systemtap session. There is one namespace for all global variables, regardless of which script file they are found within. Concurrent access to global variables is automatically protected with locks, see the SAFETY AND SECURITY section for more details. A global declaration may be written at the outermost level anywhere, not within a block of code. Global variables which are written but never read will be displayed automatically at session shutdown. The translator will infer for each its value type, and if it is used as an array, its key types. Optionally, scalar globals may be initialized with a string or number literal. The following declaration marks variables as global.

global var1, var2, var3=4

Global variables can also be set as module options. One can do this by either using the -G option, or the module must first be compiled using stap -p4. Global variables can then be set on the command line when calling staprun on the module generated by stap -p4. See staprun(8) for more information.

Arrays are limited in size by the MAXMAPENTRIES variable -- see the SAFETY AND SECURITY section for details. Optionally, global arrays may be declared with a maximum size in brackets, overriding MAXMAPENTRIES for that array only. Note that this doesn't indicate the type of keys for the array, just the size.

global tiny_array[10], normal_array, big_array[50000]

Arrays may be configured for wrapping using the '%' suffix. This causes older elements to be overwritten if more elements are inserted than the array can hold. This works for both associative and statistics typed arrays.

global wrapped_array1%[10], wrapped_array2%

Many types of probe points provide context variables, which are run-time values, safely extracted from the kernel or userspace program being probed. These are prefixed with the $ character. The CONTEXT VARIABLES section in stapprobes(3stap) lists what is available for each type of probe point. These context variables become normal string or numeric scalars once they are stored in normal script variables. See the TYPECASTING section below on how to to turn them back into typed pointers for further processing as context variables.

STATEMENTS¶

Statements enable procedural control flow. They may occur within functions and probe handlers. The total number of statements executed in response to any single probe event is limited to some number defined by a macro in the translated C code, and is in the neighbourhood of 1000.

EXP

Execute the string- or integer-valued expression and throw away the value.

{ STMT1 STMT2 ... }

Execute each statement in sequence in this block. Note that separators or terminators are generally not necessary between statements.

;

Null statement, do nothing. It is useful as an optional separator between statements to improve syntax-error detection and to handle certain grammar ambiguities.

if (EXP) STMT1 [ else STMT2 ]

Compare integer-valued EXP to zero. Execute the first (non-zero) or second STMT (zero).

while (EXP) STMT

While integer-valued EXP evaluates to non-zero, execute STMT.

for (EXP1; EXP2; EXP3) STMT

Execute EXP1 as initialization. While EXP2 is non-zero, execute STMT, then the iteration expression EXP3.

foreach (VAR in ARRAY [ limit EXP ]) STMT

Loop over each element of the named global array, assigning current key to VAR. The array may not be modified within the statement. By adding a single + or - operator after the VAR or the ARRAY identifier, the iteration will proceed in a sorted order, by ascending or descending index or value. If the array contains statistics aggregates, adding the desired @operator between the ARRAY identifier and the + or - will specify the sorting aggregate function. See the STATISTICS section below for the ones available. Default is @count. Using the optional limit keyword limits the number of loop iterations to EXP times. EXP is evaluated once at the beginning of the loop.

foreach ([VAR1, VAR2, ...] in ARRAY [ limit EXP ]) STMT

Same as above, used when the array is indexed with a tuple of keys. A sorting suffix may be used on at most one VAR or ARRAY identifier.

foreach ([VAR1, VAR2, ...] in ARRAY [INDEX1, INDEX2, ...] [ limit EXP ]) STMT

Same as above, where iterations are limited to elements in the array where the keys match the index values specified. The symbol * can be used to specify an index and will be treated as a wildcard.

foreach (VALUE = VAR in ARRAY [ limit EXP ]) STMT

This variant of foreach saves current value into VALUE on each iteration, so it is the same as ARRAY[VAR]. This also works with a tuple of keys. Sorting suffixes on VALUE have the same effect as on ARRAY.

foreach (VALUE = VAR in ARRAY [INDEX1, INDEX2, ...] [ limit EXP ]) STMT

Same as above, where iterations are limited to elements in the array where the keys match the index values specified. The symbol * can be used to specify an index and will be treated as a wildcard.

break, continue

Exit or iterate the innermost nesting loop (while or for or foreach) statement.

return EXP

Return EXP value from enclosing function. If the function's value is not taken anywhere, then a return statement is not needed, and the function will have a special "unknown" type with no return value.

next

Return now from enclosing probe handler. This is especially useful in probe aliases that apply event filtering predicates.

try { STMT1 } catch { STMT2 }

Run the statements in the first block. Upon any run-time errors, abort STMT1 and start executing STMT2. Any errors in STMT2 will propagate to outer try/catch blocks, if any.

try { STMT1 } catch(VAR) { STMT2 }

Same as above, plus assign the error message to the string scalar variable VAR.

delete ARRAY[INDEX1, INDEX2, ...]

Remove from ARRAY the element specified by the index tuple. If the index tuple contains a * in place of an index, the * is treated as a wildcard and all elements with keys that match the index tuple will be removed from ARRAY. The value will no longer be available, and subsequent iterations will not report the element. It is not an error to delete an element that does not exist.

delete ARRAY

Remove all elements from ARRAY.

delete SCALAR

Removes the value of SCALAR. Integers and strings are cleared to 0 and "" respectively, while statistics are reset to the initial empty state.

EXPRESSIONS¶

Systemtap supports a number of operators that have the same general syntax, semantics, and precedence as in C and awk. Arithmetic is performed as per typical C rules for signed integers. Division by zero or overflow is detected and results in an error.

binary numeric operators

* / % + - >> << & ^ | && ||

binary string operators

. (string concatenation)

numeric assignment operators

= *= /= %= += -= >>= <<= &= ^= |=

string assignment operators

= .=

unary numeric operators

+ - ! ~ ++ --

binary numeric, string comparison or regex matching operators

< > <= >= == != =~ !~

ternary operator

cond ? exp1 : exp2

grouping operator

( exp )

function call

fn ([ arg1, arg2, ... ])

array membership check

exp in array
[exp1, exp2, ...] in array
[*, *, ... ]in array

REGULAR EXPRESSION MATCHING¶

The scripting language supports regular expression matching. The basic syntax is as follows:

exp =~ regex
exp !~ regex

(The first operand must be an expression evaluating to a string; the second operand must be a string literal containing a syntactically valid regular expression.)

The regular expression syntax supports most of the features of POSIX Extended Regular Expressions, except for subexpression reuse ("\1") functionality. The ability to capture and extract the contents of the matched string and subexpressions has not yet been implemented.

PROBES¶

The main construct in the scripting language identifies probes. Probes associate abstract events with a statement block ("probe handler") that is to be executed when any of those events occur. The general syntax is as follows:

probe PROBEPOINT [, PROBEPOINT] { [STMT ...] }
probe PROBEPOINT [, PROBEPOINT] if (CONDITION) { [STMT ...] }

Events are specified in a special syntax called "probe points". There are several varieties of probe points defined by the translator, and tapset scripts may define further ones using aliases. Probe points may be wildcarded, grouped, or listed in preference sequences, or declared optional. More details on probe point syntax and semantics are listed on the stapprobes(3stap) manual page.

The probe handler is interpreted relative to the context of each event. For events associated with kernel code, this context may include variables defined in the source code at that spot. These "context variables" are presented to the script as variables whose names are prefixed with "$". They may be accessed only if the kernel's compiler preserved them despite optimization. This is the same constraint that a debugger user faces when working with optimized code. In addition, the objects must exist in paged-in memory at the moment of the systemtap probe handler's execution, because systemtap must not cause (suppresses) any additional paging. Some probe types have very little context. See the stapprobes(3stap) man pages to see the kinds of context variables available at each kind of probe point.

Probes may be decorated with an arming condition, consisting of a simple boolean expression on read-only global script variables. While disarmed (condition evaluates to false), some probe types reduce or eliminate their run-time overheads. When an arming condition evaluates to true, probes will be soon re-armed, and their probe handlers will start getting called as the events fire. (Some events may be lost during the arming interval. If this is unacceptable, do not use arming conditions for those probes.)

New probe points may be defined using "aliases". Probe point aliases look similar to probe definitions, but instead of activating a probe at the given point, it just defines a new probe point name as an alias to an existing one. There are two types of alias, i.e. the prologue style and the epilogue style which are identified by "=" and "+=" respectively.

For prologue style alias, the statement block that follows an alias definition is implicitly added as a prologue to any probe that refers to the alias. While for the epilogue style alias, the statement block that follows an alias definition is implicitly added as an epilogue to any probe that refers to the alias. For example:

probe syscall.read = kernel.function("sys_read") {


  fildes = $fd


  if (execname() == "init") next  # skip rest of probe
}

defines a new probe point syscall.read, which expands to kernel.function("sys_read"), with the given statement as a prologue, which is useful to predefine some variables for the alias user and/or to skip probe processing entirely based on some conditions. And

probe syscall.read += kernel.function("sys_read") {


  if (tracethis) println ($fd)
}

defines a new probe point with the given statement as an epilogue, which is useful to take actions based upon variables set or left over by the the alias user. Please note that in each case, the statements in the alias handler block are treated ordinarily, so that variables assigned there constitute mere initialization, not a macro substitution.

An alias is used just like a built-in probe type.

probe syscall.read {


  printf("reading fd=%d\n", fildes)


  if (fildes > 10) tracethis = 1
}

FUNCTIONS¶

Systemtap scripts may define subroutines to factor out common work. Functions take any number of scalar (integer or string) arguments, and must return a single scalar (integer or string). An example function declaration looks like this:

function thisfn (arg1, arg2) {


   return arg1 + arg2
}

Note the general absence of type declarations, which are instead inferred by the translator. However, if desired, a function definition may include explicit type declarations for its return value and/or its arguments. This is especially helpful for embedded-C functions. In the following example, the type inference engine need only infer type type of arg2 (a string).

function thatfn:string (arg1:long, arg2) {


   return sprint(arg1) . arg2
}

Functions may call others or themselves recursively, up to a fixed nesting limit. This limit is defined by a macro in the translated C code and is in the neighbourhood of 10.

PRINTING¶

There are a set of function names that are specially treated by the translator. They format values for printing to the standard systemtap output stream in a more convenient way. The sprint* variants return the formatted string instead of printing it.

print, sprint

Print one or more values of any type, concatenated directly together.

println, sprintln

Print values like print and sprint, but also append a newline.

printd, sprintd

Take a string delimiter and two or more values of any type, and print the values with the delimiter interposed. The delimiter must be a literal string constant.

printdln, sprintdln

Print values with a delimiter like printd and sprintd, but also append a newline.

printf, sprintf

Take a formatting string and a number of values of corresponding types, and print them all. The format must be a literal string constant.

The printf formatting directives similar to those of C, except that they are fully type-checked by the translator:

The # flag selects the alternate forms. For octal, this prefixes a 0. For hex, this prefixes 0x or 0X, depending on case. For characters, this escapes non-printing values with either C-like escapes or raw octal.

Examples:

a = "alice", b = "bob", p = 0x1234abcd, i = 123, j = -1, id[a] = 1234, id[b] = 4567
print("hello")
	Prints: hello
println(b)
	Prints: bob\n
println(a . " is " . sprint(16))
	Prints: alice is 16
foreach (name in id)  printdln("|", strlen(name), name, id[name])
	Prints: 5|alice|1234\n3|bob|4567
printf("%c is %s; %x or %X or %p; %d or %u\n",97,a,p,p,p,j,j)
	Prints: a is alice; 1234abcd or 1234ABCD or 0x1234abcd; -1 or 18446744073709551615\n
printf("2 bytes of kernel buffer at address %p: %2m", p, p)
	Prints: 2 byte of kernel buffer at address 0x1234abcd: <binary data>
printf("%4b", p)
	Prints (these values as binary data): 0x1234abcd
printf("%#o %#x %#X\n", 1, 2, 3)
	Prints: 01 0x2 0X3
printf("%#c %#c %#c\n", 0, 9, 42)
	Prints: \000 \t *

STATISTICS¶

It is often desirable to collect statistics in a way that avoids the penalties of repeatedly exclusive locking the global variables those numbers are being put into. Systemtap provides a solution using a special operator to accumulate values, and several pseudo-functions to extract the statistical aggregates.

The aggregation operator is <<<, and resembles an assignment, or a C++ output-streaming operation. The left operand specifies a scalar or array-index lvalue, which must be declared global. The right operand is a numeric expression. The meaning is intuitive: add the given number to the pile of numbers to compute statistics of. (The specific list of statistics to gather is given separately, by the extraction functions.)

foo <<< 1
stats[pid()] <<< memsize

The extraction functions are also special. For each appearance of a distinct extraction function operating on a given identifier, the translator arranges to compute a set of statistics that satisfy it. The statistics system is thereby "on-demand". Each execution of an extraction function causes the aggregation to be computed for that moment across all processors.

Here is the set of extractor functions. The first argument of each is the same style of lvalue used on the left hand side of the accumulate operation. The @count(v), @sum(v), @min(v), @max(v), @avg(v) extractor functions compute the number/total/minimum/maximum/average of all accumulated values. The resulting values are all simple integers. Arrays containing aggregates may be sorted and iterated. See the foreach construct above.

Histograms are also available, but are more complicated because they have a vector rather than scalar value. @hist_linear(v,start,stop,interval) represents a linear histogram from "start" to "stop" by increments of "interval". The interval must be positive. Similarly, @hist_log(v) represents a base-2 logarithmic histogram. Printing a histogram with the print family of functions renders a histogram object as a tabular "ASCII art" bar chart.

probe timer.profile {


  x[1] <<< pid()


  x[2] <<< uid()


  y <<< tid()
}
global x // an array containing aggregates
global y // a scalar
probe end {


  foreach ([i] in x @count+) {


     printf ("x[%d]: avg %d = sum %d / count %d\n",


             i, @avg(x[i]), @sum(x[i]), @count(x[i]))


     println (@hist_log(x[i]))


  }


  println ("y:")        


  println (@hist_log(y))  
}

TYPECASTING¶

Once a pointer (see the CONTEXT VARIABLES section of stapprobes(3stap)) has been saved into a script integer variable, the translator loses the type information necessary to access members from that pointer. Using the @cast() operator tells the translator how to interpret the number as a typed pointer.

@cast(p, "type_name"[, "module"])->member

This will interpret p as a pointer to a struct/union named type_name and dereference the member value. Further ->subfield expressions may be appended to dereference more levels. NOTE: the same dereferencing operator -> is used to refer to both direct containment or pointer indirection. Systemtap automatically determines which. The optional module tells the translator where to look for information about that type. Multiple modules may be specified as a list with : separators. If the module is not specified, it will default either to the probe module for dwarf probes, or to "kernel" for functions and all other probes types.

The translator can create its own module with type information from a header surrounded by angle brackets, in case normal debuginfo is not available. For kernel headers, prefix it with "kernel" to use the appropriate build system. All other headers are build with default GCC parameters into a user module. Multiple headers may be specified in sequence to resolve a codependency.

@cast(tv, "timeval", "<sys/time.h>")->tv_sec
@cast(task, "task_struct", "kernel<linux/sched.h>")->tgid
@cast(task, "task_struct",


      "kernel<linux/sched.h><linux/fs_struct.h>")->fs->umask

Values acquired by @cast may be pretty-printed by the $ and $$ suffix operators, the same way as described in the CONTEXT VARIABLES section of the stapprobes(3stap) manual page.

When in guru mode, the translator will also allow scripts to assign new values to members of typecasted pointers.

Typecasting is also useful in the case of void* members whose type may be determinable at runtime.

probe foo {


  if ($var->type == 1) {


    value = @cast($var->data, "type1")->bar


  } else {


    value = @cast($var->data, "type2")->baz


  }


  print(value)
}

EMBEDDED C¶

When in guru mode, the translator accepts embedded code in the top level of the script. Such code is enclosed between %{ and %} markers, and is transcribed verbatim, without analysis, in some sequence, into the top level of the generated C code. At the outermost level, this may be useful to add #include instructions, and any auxiliary definitions for use by other embedded code.

Another place where embedded code is permitted is as a function body. In this case, the script language body is replaced entirely by a piece of C code enclosed again between %{ and %} markers. This C code may do anything reasonable and safe. There are a number of undocumented but complex safety constraints on atomicity, concurrency, resource consumption, and run time limits, so this is an advanced technique.

The memory locations set aside for input and output values are made available to it using macros STAP_ARG_* and STAP_RETVALUE. Errors may be signalled with STAP_ERROR. Output may be written with STAP_PRINTF. The function may return early with STAP_RETURN. Here are some examples:

function integer_ops (val) %{


  STAP_PRINTF("%d\n", STAP_ARG_val);


  STAP_RETVALUE = STAP_ARG_val + 1;


  if (STAP_RETVALUE == 4)


      STAP_ERROR("wrong guess: %d", (int) STAP_RETVALUE);


  if (STAP_RETVALUE == 3)


      STAP_RETURN(0);


  STAP_RETVALUE ++;
%}
function string_ops (val) %{


  strlcpy (STAP_RETVALUE, STAP_ARG_val, MAXSTRINGLEN);


  strlcat (STAP_RETVALUE, "one", MAXSTRINGLEN);


  if (strcmp (STAP_RETVALUE, "three-two-one"))


      STAP_RETURN("parameter should be three-two-");
%}
function no_ops () %{


    STAP_RETURN(); /* function inferred with no return value */
%}

The function argument and return value types have to be inferred by the translator from the call sites in order for this to work. The user should examine C code generated for ordinary script-language functions in order to write compatible embedded-C ones.

The last place where embedded code is permitted is as an expression rvalue. In this case, the C code enclosed between %{ and %} markers is interpreted as an ordinary expression value. It is assumed to be a normal 64-bit signed number, unless the marker /* string */ is included, in which case it's treated as a string.

function add_one (val) {


  return val + %{ 1 %}
}
function add_string_two (val) {


  return val . %{ /* string */ "two" %}
}

The embedded-C code may contain markers to assert optimization and safety properties.

/* pure */

means that the C code has no side effects and may be elided entirely if its value is not used by script code.

/* stable */

means that the C code always has the same value (in any given probe handler invocation), so repeated calls may be automatically replaced by memoized values. Such functions must take no parameters, and also be pure.

/* unprivileged */

means that the C code is so safe that even unprivileged users are permitted to use it.

/* myproc-unprivileged */

means that the C code is so safe that even unprivileged users are permitted to use it, provided that the target of the current probe is within the user's own process.

/* guru */

means that the C code is so unsafe that a systemtap user must specify -g (guru mode) to use this.

/* unmangled */

in an embedded-C function, means that the legacy (pre-1.8) argument access syntax should be made available inside the function. Hence, in addition to STAP_ARG_foo and STAP_RETVALUE one can use THIS->foo and THIS->__retvalue respectively inside the function. This is useful for quickly migrating code written for SystemTap version 1.7 and earlier.

/* unmodified-fnargs */

in an embedded-C function, means that the function arguments are not modified inside the function body.

/* string */

in embedded-C expressions only, means that the expression has const char * type and should be treated as a string value, instead of the default long numeric.

BUILT-INS¶

A set of builtin probe point aliases are provided by the scripts installed in the directory specified in the stappaths(7) manual page. The functions are described in the stapprobes(3stap) manual page.

ABNORMAL TERMINATION¶

One should avoid killing the stap process forcibly, for example with SIGKILL, because the stapio process (a child process of the stap process) and the loaded module may be left running on the system. If this happens, send SIGTERM or SIGINT to any remaining stapio processes, then use rmmod to unload the systemtap module.

PERMISSIONS¶

For the normal linux-kernel-module runtime, to run the kernel objects systemtap builds, a user must be one of the following:

• the root user;
• a member of the stapdev and stapusr groups;
• a member of the stapsys and stapusr groups; or
• a member of the stapusr group.

The root user or a user who is a member of both the stapdev and stapusr groups can build and run any systemtap script.

A user who is a member of both the stapsys and stapusr groups can only use pre-built modules under the following conditions:

• The module has been signed by a trusted signer. Trusted signers are normally systemtap compile-servers which sign modules when the --privilege option is specified by the client. See the stap-server(8) manual page for more information.
• The module was built using the --privilege=stapsys or the --privilege=stapusr options.

Members of only the stapusr group can only use pre-built modules under the following conditions:

•

The module is located in the /lib/modules/VERSION/systemtap directory. This directory must be owned by root and not be world writable.

or

• The module has been signed by a trusted signer. Trusted signers are normally systemtap compile-servers which sign modules when the --privilege option is specified by the client. See the stap-server(8) manual page for more information.
• The module was built using the --privilege=stapusr option.

The kernel modules generated by stap program are run by the staprun program. The latter is a part of the Systemtap package, dedicated to module loading and unloading (but only in the white zone), and kernel-to-user data transfer. Since staprun does not perform any additional security checks on the kernel objects it is given, it would be unwise for a system administrator to add untrusted users to the stapdev or stapusr groups.

SECUREBOOT¶

If the current system has SecureBoot turned on in the UEFI firmware, all kernel modules must be signed. (Some kernels may allow disabling SecureBoot long after booting with a key sequence such as SysRq-X, making it unnecessary to sign modules.) The systemtap compile server can sign modules with a MOK (Machine Owner Key) that it has in common with a client system. See the following wiki page for more details:

RESOURCE LIMITS¶

Many resource use limits are set by macros in the generated C code. These may be overridden with -D flags. A selection of these is as follows:

MAXNESTING

Maximum number of nested function calls. Default determined by script analysis, with a bonus 10 slots added for recursive scripts.

MAXSTRINGLEN

Maximum length of strings, default 128.

MAXTRYLOCK

Maximum number of iterations to wait for locks on global variables before declaring possible deadlock and skipping the probe, default 1000.

MAXACTION

Maximum number of statements to execute during any single probe hit (with interrupts disabled), default 1000. Note that for straight-through probe handlers lacking loops or recursion, due to optimization, this parameter may be interpreted too conservatively.

MAXACTION_INTERRUPTIBLE

Maximum number of statements to execute during any single probe hit which is executed with interrupts enabled (such as begin/end probes), default (MAXACTION * 10).

MAXBACKTRACE

Maximum number of stack frames that will be be processed by the stap runtime unwinder as produced by the backtrace functions in the [u]context-unwind.stp tapsets, default 20.

MAXMAPENTRIES

Default maximum number of rows in any single global array, default 2048. Individual arrays may be declared with a larger or smaller limit instead:

global big[10000],little[5]

or denoted with % to make them wrap-around automatically.

MAXERRORS

Maximum number of soft errors before an exit is triggered, default 0, which means that the first error will exit the script. Note that with the --suppress-handler-errors option, this limit is not enforced.

MAXSKIPPED

Maximum number of skipped probes before an exit is triggered, default 100. Running systemtap with -t (timing) mode gives more details about skipped probes. With the default -DINTERRUPTIBLE=1 setting, probes skipped due to reentrancy are not accumulated against this limit. Note that with the --suppress-handler-errors option, this limit is not enforced.

MINSTACKSPACE

Minimum number of free kernel stack bytes required in order to run a probe handler, default 1024. This number should be large enough for the probe handler's own needs, plus a safety margin.

MAXUPROBES

Maximum number of concurrently armed user-space probes (uprobes), default somewhat larger than the number of user-space probe points named in the script. This pool needs to be potentially large because individual uprobe objects (about 64 bytes each) are allocated for each process for each matching script-level probe.

STP_MAXMEMORY

Maximum amount of memory (in kilobytes) that the systemtap module should use, default unlimited. The memory size includes the size of the module itself, plus any additional allocations. This only tracks direct allocations by the systemtap runtime. This does not track indirect allocations (as done by kprobes/uprobes/etc. internals).

STP_OVEROAD_THRESHOLD, STP_OVERLOAD_INTERVAL

Maximum number of machine cycles spent in probes on any cpu per given interval, before an overload condition is declared and the script shut down. The defaults are 500 million and 1 billion, so as to limit stap script cpu consumption at around 50%.

STP_PROCFS_BUFSIZE

Size of procfs probe read buffers (in bytes). Defaults to MAXSTRINGLEN. This value can be overridden on a per-procfs file basis using the procfs read probe .maxsize(MAXSIZE) parameter.

With scripts that contain probes on any interrupt path, it is possible that those interrupts may occur in the middle of another probe handler. The probe in the interrupt handler would be skipped in this case to avoid reentrance. To work around this issue, execute stap with the option -DINTERRUPTIBLE=0 to mask interrupts throughout the probe handler. This does add some extra overhead to the probes, but it may prevent reentrance for common problem cases. However, probes in NMI handlers and in the callpath of the stap runtime may still be skipped due to reentrance.

Multiple scripts can write data into a relay buffer concurrently. A host script provides an interface for accessing its relay buffer to guest scripts. Then, the output of the guests are merged into the output of the host. To run a script as a host, execute stap with -DRELAYHOST[=name] option. The name identifies your host script among several hosts. While running the host, execute stap with -DRELAYGUEST[=name] to add a guest script to the host. Note that you must unload guests before unloading a host. If there are some guests connected to the host, unloading the host will be failed.

In case something goes wrong with stap or staprun after a probe has already started running, one may safely kill both user processes, and remove the active probe kernel module with rmmod. Any pending trace messages may be lost.

PROBE RESTRICTIONS¶

A member of the groups stapusr and stapsys may use all probe points.

A member of only the group stapusr may use only the following probes:

SCRIPT LANGUAGE RESTRICTIONS¶

The following scripting language features are unavailable to all unprivileged users:

RUNTIME RESTRICTIONS¶

The following runtime restrictions are placed upon all unprivileged users:

Additional restrictions are placed on members of only the group stapusr:

COMMAND LINE OPTION RESTRICTIONS¶

Some command line options provide access to features which must not be available to all unprivileged users:

    -a, -B, -D, -I, -r, -R

ENVIRONMENT RESTRICTIONS¶

The following environment variables must not be set for all unprivileged users:

SYSTEMTAP_RUNTIME
SYSTEMTAP_TAPSET
SYSTEMTAP_DEBUGINFO_PATH

TAPSET RESTRICTIONS¶

In general, tapset functions are only available for members of the group stapusr when they do not gather information that an ordinary program running with that user's privileges would be denied access to.

There are two categories of unprivileged tapset functions. The first category consists of utility functions that are unconditionally available to all users; these include such things as:

cpu:long ()
exit ()
str_replace:string (prnt_str:string, srch_str:string, rplc_str:string)

The second category consists of so-called myproc-unprivileged functions that can only gather information within their own processes. Scripts that wish to use these functions must test the result of the tapset function is_myproc and only call these functions if the result is 1. The script will exit immediately if any of these functions are called by an unprivileged user within a probe within a process which is not owned by that user. Examples of myproc-unprivileged functions include:

print_usyms (stk:string)
user_int:long (addr:long)
usymname:string (addr:long)

A compile error is triggered when any function not in either of the above categories is used by members of only the group stapusr.

No other built-in tapset functions may be used by members of only the group stapusr.